Meaning
Transmission loss characteristics define signal power reduction per unit length in flexible low-loss 400-series coaxial cables across operating frequency bands. Evaluating LMR-400 attenuation enables RF system integrators to calculate exact signal degradation between radio modules and external antennas. Physical cable construction, including foam dielectric cores and bonded aluminum foil shields, dictates loss figures across sub-6 GHz spectrum allocations.
Frequency Response
High frequency signal transmission experiences greater resistive and dielectric losses along coaxial conductor paths. Published values for LMR-400 attenuation show loss increasing from roughly 3.9 dB per 100 feet at 150 MHz to approximately 6.8 dB per 100 feet at 2.4 GHz. Inner conductor skin effect concentrates RF currents near the copper surface as operating frequencies rise.
Dielectric loss tangents in the polyethylene foam core contribute additional signal absorption at higher microwave frequencies.
Thermal Impact
Elevated ambient temperatures increase copper conductor resistance and slightly elevate total path loss over long cable runs.
Cable Selection
Enclosure design and outdoor antenna routing require careful trade-offs between cable flexibility and acceptable signal loss. Factoring LMR-400 attenuation into link budget calculations determines whether active tower-mounted amplifiers are required for long cable runs. Module integration specifications limit total cable run lengths to maintain receiver sensitivity thresholds at the antenna interface.
Swept insertion loss measurements using vector network analyzers verify cable quality during site commissioning. Commissioning records log final sweep traces against baseline loss figures to confirm installation standards.