Meaning
Exterior dimensions of a raised circular locating boss mounted on the stationary mould base govern concentric alignment with the injection press platen opening. Regulated under standards including ISO 20434 and regional machinery formats, locating ring diameter centers the mould sprue bushing directly along the injection unit nozzle axis. This interface specification governs the outer locating flange dimension, register height and fixing bolt pattern, terminating its geometric boundary where the ring fastens into the top clamping plate.
Centering Mechanics
Coaxial alignment between machine nozzle and tool sprue bushing prevents molten polymer leakage at the injection barrel tip. Machine platens feature matching central bores machined to standard metric or imperial sizes. Precise fit of the locating ring diameter ensures immediate concentricity within 0.05 millimeters upon mounting.
Misalignment causes nozzle tip leakage, cold slug drool and abnormal sprue bushing wear.
Interface Standards
Global markets require specific standard diameters depending on platen scale and machine manufacturer conventions. European systems rely heavily on 125-millimeter or 160-millimeter outer diameters ground to clearance tolerances such as f7 or h6. North American machinery frequently specifies 3.990-inch or 5.990-inch rings machined to slip-fit tolerances against 4.000-inch and 6.000-inch platen registers.
Dual-diameter steps occasionally resolve multi-machine fleet requirements across cross-regional operations.
Mounting Verification
Dimensional inspection via vernier calipers or outer micrometer checks the outer seating diameter before tool trial sign-off. Platen bore fit tests confirm smooth entry without excessive radial play or heavy mechanical binding. Fastening bolt torque records verify secure clamping into the top plate counterbore to prevent ring detachment during mould handling.
Machine setup logs track locating ring size alongside platen layout records to eliminate press scheduling conflicts. Concentricity runout between the outer register and the sprue bushing internal spherical radius must stay below 0.02 millimeters. Incorrect ring selections cause nozzle unseating and resin blow-by under continuous injection pressures.
Maintenance checklists inspect the outer locating face for burrs that impede square seating against platens. Standardized rings reduce setup times during high-mix production cycles. Clamping safety relies on concentric nozzle contact to prevent unbalanced side thrust forces on the tool.