Meaning
Physical alteration of the molecular junction in microscopic wire bonds or ultrasonic welds occurs when external force or thermal expansion stress is applied. This micro-weld deformation changes the grain structure and electrical path of the bonded metal. The phenomenon happens most frequently at the interface of fine gold or copper wire connections on silicon pads.
It defines the point where plastic strain begins to weaken the mechanical joint.
Force Application
Ultrasonic bonding machines apply controlled force and high-frequency energy to create a reliable metal junction. During the creation of the connection, micro-weld deformation allows the metals to diffuse without melting. Too much energy flattens the wire too far, which creates a thin, fragile neck.
Correct alignment of the tool maintains consistent wire diameter above the bond.
Temperature Cycling
Mismatched thermal expansion coefficients between the metal wire and the silicon substrate cause stress during device operation. Continuous heating and cooling cycles drive localized micro-weld deformation that can result in fatigue cracks. These cracks gradually increase the resistance of the junction.
Failure Isolation
Quality control operators detect structural weak points through destructive pull testing or non-destructive visual checks. When assessing micro-weld deformation, the width of the squashed wire region indicates the amount of energy absorbed. Sophisticated x-ray systems reveal microscopic voids beneath the weld surface.
Resolving these issues requires fine-tuning the ultrasonic power and the clamping pressure, which prevents long-term joint degradation under harsh operating environments.