Meaning
Short-duration transmission of high-power radio frequency energy from a narrowband internet of things module occurs during scheduled uplink communication intervals. This nb-iot burst allows the device to transmit sensor data quickly and return to a low-power sleep state to conserve battery charge.
Current Profile
During the active phase, the transmitter’s power amplifier draws a substantial current from the power supply block. This nb-iot burst introduces a steep step-load on the battery, which can cause transient voltage drops on the primary power rail. Circuit designers must analyze this profile to ensure that the system does not reset during transmission.
Battery Strain
Internal resistance in small lithium-chemistry batteries increases at lower temperatures, making them highly susceptible to transient voltage drops. The rapid draw of current during the nb-iot burst can pull the terminal voltage below the regulator’s dropout limit if the circuit lacks adequate capacitance. This issue is particularly critical for modules designed for long deployment lifetimes in unheated outdoor cabinets.
Consequently, hardware engineers utilize low-leakage supercapacitors to supply the required transient energy during these short intervals.
Communication Cycle
Optimizing the duration of the transmit event reduces the total energy consumed per session. Minimizing the length of the nb-iot burst depends on the use of efficient scheduling and high-order modulation where channel conditions permit. Once the transmission ends, the device’s transition to a sleep state terminates the current draw, allowing the battery chemistry to recover.