Meaning
Chemical reaction between the lithium anode and the electrolyte creates a protective crystalline layer during periods of inactive storage. This passivation film growth prevents self discharge and extends the shelf life of the battery but increases its initial internal resistance. Understanding this phenomenon is essential for designing devices that must operate reliably after long periods of inactivity.
Chemical Process
Formation of lithium chloride crystals on the anode surface occurs naturally when no current is drawn from the cell. Although passivation film growth preserves the active chemical energy, the resulting layer acts as an insulator that restricts the flow of ions. The thickness of this insulating layer increases over time, especially when the battery is stored in high temperature environments.
Integration Problem
Initial activation of a passivated battery can fail if the device attempts to transmit immediately after wake up. Because passivation film growth restricts the current flow, the terminal voltage drops rapidly when the radio module starts up, often causing a system reset. This voltage drop can lead to a continuous loop of resets and premature battery failure if the circuit is not designed to handle the initial high impedance.
Activation Step
Firmware routines can apply a controlled discharge load to break down the crystalline layer before initiating radio communications. This pre discharge phase dissolves the crystals and reduces the internal resistance to normal operating levels. The duration and intensity of the activation pulse must be carefully calibrated to avoid excessive energy waste while ensuring the complete removal of the passivation layer.
Implementing this startup sequence is necessary to ensure the initial connection attempt succeeds under all storage histories.