Meaning
Physical properties of synthetic resins change as they attract and hold water molecules within their molecular structure. Plastic water absorption is a factor in the selection of enclosures for electronics intended for outdoor or humid environments. Materials like nylon exhibit high rates of uptake while others are more resistant.
Dimensional Change
Swelling occurs as the absorbed moisture forces the polymer chains apart. Plastic water absorption can cause a tight-fitting enclosure to warp or a snap-fit connector to fail. Precision parts might grow enough to jam moving mechanisms or exert pressure on internal circuit boards.
Designers must account for this expansion during the initial CAD phase by including appropriate tolerances.
Dielectric Shift
Water is a polar molecule that significantly alters the electrical characteristics of the material it enters. Plastic water absorption increases the permittivity and loss tangent of an enclosure, which can detune an internal antenna. This shift is particularly problematic for high-frequency devices where the housing is part of the RF system.
Signal strength may vary as the humidity of the environment changes over the course of a day. Changes in the moisture content of the plastic can lead to inconsistent wireless performance.
Mechanical Failure
Moisture acts as a plasticizer. Excessive plastic water absorption can lead to the failure of mounting bosses or the cracking of the shell under stress. In some polymers, the presence of water triggers a slow chemical breakdown called hydrolysis.
Regular testing in environmental chambers indicates how a product will age in the field.