Meaning
Impedance disparity between the output port of a transmitter and the transmission line leading to the antenna causes power reflection. This power amplifier mismatch occurs when the nominal load impedance is not matched to the output impedance of the semiconductor device. When this condition exists, the forward power is not fully delivered to the antenna, and a portion of the signal reflects back into the amplifier.
This reflection reduces the total radiated power and can cause the output stage to operate inefficiently.
Impedance Effect
The mismatched load alters the load line of the transistor and pushes it away from its optimal operating point. This shift increases the non-linear distortion of the transmitted signal and violates out-of-band emission limits. Consequently, power amplifier mismatch is a major concern when designing compact wireless devices where antennas are close to internal shielding or battery casings.
Hardware Protection
Modern radio designs incorporate directional couplers to measure the forward and reflected power levels. This measurement allows the system to detect severe cases of power amplifier mismatch and take protective action. If the reflected power exceeds a safe threshold, the transceiver reduces its output power to prevent damage to the output transistor.
System Mitigation
Antenna tuning networks can be placed between the amplifier and the antenna to dynamically compensate for these impedance shifts. These networks use variable capacitors to maintain a stable load and minimize the power amplifier mismatch during active operation.