Meaning
Storage of pre-calculated gain values within non-volatile memory allows a cellular module to adjust its output based on frequency and temperature. Use of power lookup tables ensures that the device transmits at the requested level without the need for continuous real time calculation. Each entry in the table corresponds to a specific combination of operating conditions.
This data is generated during the factory calibration of the radio. Using these pre-defined values eliminates the delay associated with calculating the correct gain during the rapid power ramps required by modern LTE and 5G networks.
Calibration Logic
Testing of the radio at several discrete points across its frequency range provides the raw data for the firmware. The power lookup tables interpolate between these points to provide a smooth response across the entire band. Accuracy in these tables prevents the transmitter from exceeding its thermal budget or regulatory limits.
Thermal Compensation
Variation in the performance of the power amplifier is corrected by referencing the current sensor readings against the stored values. As the device heats up, the power lookup tables provide the necessary adjustments to maintain a stable output. This mechanism protects the internal components from damage caused by excessive heat.
Firmware Efficiency
Accessing a pre-defined value from memory is faster and less energy intensive than running a complex algorithm for every packet. The power lookup tables optimize the power consumption of the processor by simplifying the radio control loop. This design choice is common in battery powered devices where every milliwatt counts.