Meaning
Decrease in the quality factor of a resonant circuit or component due to energy losses. In antenna systems and filters, Q-factor degradation results in a wider bandwidth and increased insertion loss at the center frequency.
Resistive Loss
Skin effect at high frequencies forces current to flow on the surface of conductors, increasing the effective resistance. Energy becomes heat. Poor conductivity in the metals or contaminants on the surface of the traces further reduces the efficiency of the resonator by increasing the series resistance.
These resistive losses are particularly problematic in narrowband filters where steep rejection is required to maintain channel isolation.
Dielectric Absorption
Insulating materials surrounding the inductor or capacitor store and release energy with varying degrees of efficiency. If the dissipation factor of the substrate is high, Q-factor degradation occurs as the dielectric absorbs part of the oscillating field. Choosing low-loss laminates like polytetrafluoroethylene helps maintain high quality factors in microwave designs.
Performance Impact
Selectivity in a receiver depends on the sharpness of the filter response. Severe Q-factor degradation allows adjacent signals to interfere with the desired channel, reducing the overall system capacity. Monitoring this value during environmental testing confirms that moisture or temperature does not compromise the radio performance.