Meaning
A defined receiver sensitivity level at which a wireless device must register incoming radar signal pulses. Specified in decibels relative to milliwatts, the radar detection threshold determines the minimum power level that forces dynamic frequency selection routines to trigger channel evacuation. Regulatory authorities set this value based on equivalent isotropically radiated power and antenna gain configurations.
Wireless access points must detect pulse patterns reaching this power level to ensure primary radar systems remain free from interference.
Sensitivity Calibration
RF front-end design must maintain sufficient dynamic range to isolate weak radar pulses from high-power data transmissions. Calibration algorithms adjust internal attenuation and baseband gain to keep the radar detection threshold accurate across temperature variations. Noise floor shifts caused by dense deployment environments can mask pulses if receiver sensitivity degrades.
Interference Prevention
Setting the threshold too high allows unauthorized transmissions to corrupt military or meteorological radar signals. Conversely, setting the parameter too low induces false positive detections that trigger unnecessary channel changes and degrade wireless network capacity.
Compliance Testing
Automated test benches inject simulated chirp and short-pulse radar waveforms into the antenna port across varying signal amplitudes. Certification requires ninety-nine percent detection probability at or above the designated threshold value.