Requalification Protocol Execution for Relocated Multiaxis Measurement Jigs
Requalification of relocated multiaxis measurement jigs mandates thermal soak, 21-parameter laser kinematic mapping, and ISO 10360 volumetric acceptance signoff.
Relocation Protocol
Meaning
Quality assurance procedures govern the systematic decommissioning, transport, reinstallation and re-verification of precision measuring systems between facility sites. Executing a relocation protocol ensures that mechanical locking devices, transit shock logging and post-move calibrations maintain system accuracy specifications. The protocol boundary spans initial pre-move verification through final site acceptance testing.
Decommissioning Verification
Technicians document baseline repeatability figures and secure delicate mechanical axes using specialized transport locks before transit. Under a standard relocation protocol, sensitive air bearings are depressurized and glass scales are clamped against protective buffers. Detailed disassembly records ensure correct electrical cabling and pneumatic tube routing during reassembly.
Securing fragile internal structures prevents transit accelerations from damaging mechanical guide surfaces.
Reinstallation Routine
Site preparation checks confirm that foundation pad isolation, electrical supply and climate controls meet machine operational requirements. Executing a relocation protocol requires re-leveling machine bases using electronic levels prior to axis mechanical integration. Alignment routines restore structural squareness and drive system tracking geometry.
System reassembly follows structured torque sequences on main structural fasteners.
Validation Acceptance
Formal recalibration procedures verify that the relocated instrument meets original factory specifications within its new environmental setting. Following a relocation protocol concludes with laser interferometry and artifact repeatability testing to validate performance. Documented compliance reports demonstrate traceable measurement capability to quality auditors.
Complete verification sign-off reinstates the instrument for certified production inspection.