Meaning
The transmission of the same data block multiple times within a short interval to improve the probability of successful reception in poor signal conditions. Repetition bursts are frequently used in low-power wide-area networks where devices operate near the edge of coverage. This technique increases the effective signal-to-noise ratio by allowing the receiver to combine the energy of multiple packets.
Link Budget
Redundant transmissions compensate for path loss and temporary fading in the radio channel. When a sensor is installed deep underground or inside a metal enclosure, repetition bursts provide the necessary gain to reach a distant base station.
Battery Impact
Sending the same information multiple times significantly increases the energy consumed for each data upload. Designers must balance the need for reliable communication with the limited power capacity of the device. Using too many repetition bursts drains the battery prematurely.
Network Capacity
Frequent redundant transmissions occupy the radio spectrum for longer durations, which can lead to congestion if many devices use the same strategy. The network controller manages the allocation of repetition bursts to ensure that the total throughput of the cell is not compromised. This coordination prevents individual devices from monopolizing the shared air interface and ensures that enough bandwidth remains available for high-priority traffic and other users who are operating in better signal conditions.