Meaning
An alkaline chemical cleaning process converts rosin flux residues and organic acid contaminants into soluble soap compounds during printed circuit board assembly. Evaluated against post-solder surface cleanliness standards, a saponification wash cycle removes rosin and synthetic flux residues left after wave soldering or reflow operations. The scope includes wash tank chemical concentration, wash temperature control, mechanical spray impingement and aqueous rinse phases, ending at the final deionized water drying stage.
Chemical Reaction
Saponifier chemistry uses organic amines or alkanolamines to react with non-polar rosin acids. This chemical conversion turns insoluble rosin residues into water-soluble carboxylate salts. When board assemblies feature low-profile surface mount packages, a saponification wash cycle utilizes high-pressure spray nozzles to force wash chemistry beneath component bodies.
Solution temperature control maintains chemical reaction rates without damaging sensitive board materials. Subsequent deionized water rinses strip dissolved flux soaps from assembly surfaces.
Process Verification
Ionics testing quantifies surface cleanliness using resistivity of solvent extract measurements. Automated titration systems monitor wash tank chemical concentration to maintain cleaning effectiveness over extended production runs. Inadequate chemical concentration leaves non-conductive rosin spots that trap moisture during device operation.
Continuous fluid filtration removes suspended particulates from recycled wash fluids.
Cleanliness Validation
Quality assurance teams perform ionic contamination testing after board drying. Cleanliness passes when residual ionic contamination falls below established microgram per square centimeter limits.