Meaning
Protective encapsulation involves creating a continuous, gas-tight barrier at the interface of two housing components. A seam seal is typically produced using resistance welding, laser welding or specialized glass frit bonding to isolate the internal electronics from the atmosphere. This process is essential for the long-term reliability of quartz crystals and micro-electromechanical systems.
The quality of the seal is measured by its ability to prevent the ingress of moisture and contaminants over years of service.
Joining Process
Parallel seam welding uses two rotating wheel electrodes to pass a current through the lid and the package rim. This localized heating melts the interface material to form a solid-state or fused bond without overheating the sensitive components inside the cavity. The speed and pressure of the rollers must be carefully synchronized to ensure a uniform and unbroken seam seal around the entire perimeter.
Mechanical Integrity
Thermal expansion mismatch between the lid and the package can induce stress on the joint during temperature cycling. A robust seam seal must withstand these stresses without developing micro-cracks that would compromise the hermeticity. Inspecting the cross-section of the weld reveals the depth of penetration and the quality of the metallurgical bond.
Qualification Standard
Compliance with aerospace and telecommunications requirements involves rigorous leak testing and environmental stress screening. If a seam seal fails, the resulting ingress of oxygen or water vapor can cause metal migration or shift the frequency of a resonator. Visual inspection and gross leak tests are performed immediately after the welding process to verify the setup.
High-reliability applications often require a fine leak test using helium to ensure the seal meets the strict leak rate specifications.