Meaning
Phenomenon where high-frequency alternating current is forced toward the outer surface of a conductor, increasing the effective resistance. Usually skin depth degradation occurs when surface roughness or oxidation reduces the quality of the conductive path in the very thin layer where most of the current flows.
Surface Finish
Roughness on the copper foil of a printed circuit board creates a longer path for the current to travel. This geometry exacerbates skin depth degradation by increasing the ohmic losses in the circuit, which generates excess heat and reduces signal strength.
Frequency Impact
Attenuation becomes more pronounced as the operating frequency increases because the current is confined to a progressively thinner region. At millimeter-wave frequencies, skin depth degradation can make the choice of plating material, such as silver or gold, a deciding factor in the total efficiency of the antenna system. High-purity metals with high conductivity are required to keep these losses within the thermal budget of the device enclosure.
Integrity Loss
Signal distortion arises when different frequency components of a complex waveform experience varying levels of resistance. These variations alter the phase and amplitude of the high-frequency harmonics, leading to increased bit error rates in digital data streams. Calibration routines in the receiver must compensate for this frequency-dependent loss to maintain the integrity of the communication link.