Meaning
Short lengths of coaxial cable equipped with a subminiature version a connector at one end allow for a secure and standardized interface between a radio module and test equipment. This sma pigtail is frequently used during the certification process to measure conducted power and spectral purity directly from the circuit board. It replaces the internal antenna to ensure that the measurements are not affected by external interference or environmental factors.
These components are available in various lengths and connector types to suit different board layouts and testing requirements.
Impedance Matching
Maintaining a constant fifty ohm impedance is necessary to prevent signal reflections that could distort the test results. The quality of the soldering and the shielding of the cable are critical for accurate data collection.
Laboratory Usage
Technicians use these assemblies to connect the device under test to spectrum analyzers or power meters. This direct connection provides the most precise view of the transmitter performance before it reaches the antenna.
Component Selection
Choosing the correct length and cable type minimizes the insertion loss at high frequencies. These connectors are rated for specific frequency ranges and must be handled carefully to avoid wear that could impact the measurement repeatability.