Meaning
Dimensional reduction that occurs in a metal part as it cools from its solidus temperature down to ambient room temperature dictates the final size of the product. Solid-state contraction begins after the alloy has fully solidified and continues until thermal equilibrium with the environment is reached. Linear thermal expansion coefficients of the solid alloy govern this process.
Volumetric Reduction
The magnitude of this contraction depends on the material composition and the overall temperature range of the cooling cycle. For instance, a part cooled from one thousand degrees Celsius will shrink far more than one cooled from four hundred degrees Celsius. Volumetric reduction occurs in all three spatial dimensions simultaneously.
Tooling Calibration
Tooling designers must compensate for this physical change by making the mould cavity larger than the desired final component. If the mould is designed to the exact nominal dimensions of the finished part, the resulting casting will be too small to meet the drawings. Applying the correct contraction percentage to the tool geometry ensures that the cold part matches the specification.
In multi-part assemblies, this compensation must be carefully coordinated across all subcomponents to ensure that the mating surfaces align correctly after the cooling cycle is complete.
Thermal Stress
Constraints on this contraction can lead to residual stresses or warping within the casting. When the mould structure prevents the metal from shrinking freely, the material develops internal tension that can cause deformation during machining. Restructuring the casting geometry or the mould layout helps to minimize these internal forces.