Meaning
Stationary distribution of wave amplitude in a transmission line or waveguide occurs when a traveling wave is reflected back from an impedance mismatch. This pattern of stationary peaks and troughs is called a standing wave, and it represents stored rather than transmitted energy. It is characterized by the standing wave ratio, which measures the ratio of the maximum to the minimum voltage along the line.
Low reflections are necessary to maximize power transfer to the antenna.
Physical Origin
Superposition of the forward-traveling wave and the reverse-traveling reflected wave creates the interference pattern. When a standing wave is present, the phase relationship between the two waves dictates the positions of the voltage nodes and antinodes. In a lossless line, the nodes remain fixed in space and do not move along the transmission line.
Transmission Impact
Excessively high voltage peaks can exceed the dielectric breakdown threshold of the cable or connector.
Measurement Method
Vector network analyzers evaluate the reflection coefficient at the input port to calculate the standing wave ratio. Historically, slotted lines were used to probe the actual voltage distribution along the transmission path. Today, the measurement is performed digitally, enabling real-time monitoring of antenna system health during operation.
These monitors can trigger automatic shutdown circuits to protect transmitter power amplifiers from damage when reflections exceed safe thresholds.