Meaning
Controlled heating processes melt solder paste and form permanent electrical connections by circulating heated air or nitrogen around an assembled circuit board. This method of thermal convection reflow ensures even heat distribution across components of varying sizes and thermal masses. The board travels through a multi zone oven where the temperature is precisely regulated at each stage.
This technology is the standard for high volume surface mount assembly because it provides consistent results. Engineers calibrate the fan speeds and conveyor timing to match the thermal requirements of the specific assembly.
Thermal Zone
The oven is divided into preheat, soak, reflow and cooling sections to manage the rate of temperature change. During thermal convection reflow the preheat zone evaporates solvents from the solder paste and prevents damage to sensitive parts.
Heat Transfer
Forced air movement prevents the shadowing effects where large components might block heat from reaching smaller parts nearby.
Joint Integrity
Maintaining the correct peak temperature for the specified duration ensures that the solder wets the pads and leads effectively. If the thermal convection reflow process is too hot the components or the board material may sustain damage. A temperature that is too low results in cold solder joints which are prone to mechanical failure.