Meaning
Gradual reduction of mechanical stress in bolted or soldered joints occurs over time when the assembly is subjected to repeated temperature fluctuations. This process of thermal cycling relaxation leads to a decrease in the pre-load tension of fasteners and can compromise the mechanical integrity of the module. It is caused by the differing thermal expansion coefficients of the assembled materials as they heat and cool during operation.
This relaxation can result in increased contact resistance and RF leakage at shielding interfaces.
Physical Mechanism
Microstructural changes in the metal or solder alloys drive the relief of internal stresses. In thermal cycling relaxation, the repeated strain cycles induce plastic deformation and creep in the materials, causing them to permanently alter their shape. This effect is especially pronounced in lead-free solder joints and threaded aluminum housings where the temperature swings are large.
Mechanical Reliability
Using spring washers or high-strength fasteners can help maintain the required clamping force despite the relaxation effects.
Verification Protocol
Environmental test chambers simulate these operational conditions by cycling the temperature between specified extremes over hundreds of runs. Engineers measure the residual bolt torque or joint resistance after these tests to confirm the design’s long-term stability. This step is a prerequisite for certifying modules destined for demanding automotive or industrial environments.
It ensures that the assembly remains functional across its intended operational lifespan without manual maintenance.