Meaning
Measure of the ability of a physical interface to transfer heat between two touching surfaces. In a power module assembly, thermal joint conductance determines how efficiently heat moves from the semiconductor package to the heatsink. This value depends on the clamping pressure and surface roughness of the interface.
A higher conductance value indicates a lower temperature drop across the joint.
Interface Physics
Microscopic peaks and valleys on the surfaces prevent perfect contact at the molecular level. Air trapped in these voids acts as an insulator, significantly reducing the thermal joint conductance. Engineers apply thermal grease or phase-change materials to fill these gaps.
These materials have a higher conductivity than air but lower than the metal itself.
Pressure Dependence
Increasing the clamping force flattens the surface asperities and expands the effective contact area. This action improves the thermal joint conductance up to a point of diminishing returns. Bolting patterns for large radio units are designed to provide a uniform pressure distribution.
If the pressure is uneven, hot spots can develop in areas where the conductance is low.
Material Boundary
Hardness of the two mating materials influences how much they deform under load. Softer metals like aluminum adapt more easily to the surface of a harder heat spreader, enhancing the thermal joint conductance. The thickness of the interface material must be minimized to keep the total thermal resistance low.
Maintenance procedures often require the cleaning and reapplication of interface compounds to maintain the rated performance.