Meaning
Signal integrity defect resulting from an inconsistency in the characteristic impedance along a printed circuit board conduction path. Occurrence of a trace impedance mismatch causes a portion of the signal energy to reflect back toward the source rather than reaching the receiver. This phenomenon is critical in high speed designs where the wavelength of the signal is comparable to the length of the trace.
Pulse Integrity
Quality of the data transmission is degraded when reflections create ringing or overshoot on the signal edges. A trace impedance mismatch often happens at the transition between a connector and the board or at a change in the layer of the trace. These discontinuities reduce the timing margin available for the receiver to sample the data correctly.
Physical Geometry
Maintenance of the correct impedance requires precise control over the width of the copper and its distance from the ground plane. If the manufacturing process varies the thickness of the dielectric material, a trace impedance mismatch will occur across the production lot. Designers use specialized software to calculate the geometry needed for a specific target, such as fifty ohms.
Signal Loss
Accumulation of small reflections along a path can lead to significant attenuation of the high frequency components of a pulse. Because trace impedance mismatch increases the total loss of the channel, it limits the maximum length of the cable or board trace that the system can support. Testing with a time domain reflectometer identifies the exact location of the error for repair or redesign.