Meaning
Automated spatial measurement procedures rotate an active device under test within an anechoic chamber to capture full angular radiation characteristics. A turntable sweep is a physical test execution sequence where a motorized platform rotates a wireless device through three hundred and sixty degrees while fixed measurement antennas record radiated power, spurious emissions or antenna gain patterns. This procedure maps electromagnetic emissions across all azimuth angles to identify peak radiation directions and antenna nulls.
The test boundary is constrained by the physical weight limit, rotational speed and electrical isolation of the chamber turntable assembly. Radiated emissions data gathered during sweeps validates compliance with regulatory maximum peak emission limits.
Rotational Motion
Motorized positioning systems execute continuous or stepped rotation while synchronized with spectrum analyzers. Variable speed controls prevent mechanical vibration of the device under test during high-resolution angular sampling. Rotary joint interfaces inside the table hub allow power cables and control lines to rotate continuously without twisting.
Spatial Measurement
Dual-polarized receiving antennas capture horizontal and vertical polarization components at each rotational increment. Height search towers raise and lower measurement antennas between one and four meters to locate maximum field strength points. Software algorithms combine spatial data points into three-dimensional radiation pattern maps to verify total radiated power.
Test Handover
Compliance reports record maximum peak field strength values, angular positions and frequency spectrum plots for regulatory filings. Handover documentation confirms that spurious emissions across all rotational orientations remain below statutory limits. Test certificates validate that antenna pattern coverage satisfies spatial gain requirements specified in product integration guidelines.