Meaning
Direct measurement of output power from a radio module antenna port establishes a reference for radiated performance calculations. Use of a coaxial conducted baseline removes the uncertainty of antenna gain and path loss from the initial calibration. This result represents the raw capability of the silicon and front end circuitry.
The measurement occurs at a physical interface, usually a tiny connector or a soldered cable, and excludes the final enclosure effects.
Measurement Path
Shielded cabling and precise attenuators define the physical route between the device under test and the spectrum analyser. Every component in this path introduces a known loss that the engineer subtracts to find the coaxial conducted baseline at the source. High quality cables maintain signal integrity and prevent external noise from entering the measurement.
Traceability to international standards is maintained through the use of high precision adapters at every junction.
Error Correction
Calibration files stored in the test software compensate for the slight variations in cable performance across different temperature ranges. If the coaxial conducted baseline ignores these deviations, the final system power rating may drift outside of the regulatory limit. Precision improves when the system accounts for the impedance mismatch between the radio and the test gear.
Comparison Threshold
Comparison between the conducted results and the final radiated results reveals the total efficiency of the integrated antenna system. Engineers use the coaxial conducted baseline to identify whether a drop in signal strength stems from a software configuration or a physical blockage in the device housing.