Meaning
Transmission limits establishing the allowable deviation of radio frequency power from the nominal rated value when measured directly at the antenna port of a wireless module. Wireless developers track conducted power tolerance to ensure that production variations do not cause a transmitter to exceed regulatory limits or fail to meet the minimum threshold required for reliable communication.
Measurement Protocol
Test engineers perform these evaluations using a coaxial cable connected directly from the module temporary antenna connector to a calibrated power meter. This setup bypasses the antenna assembly entirely to eliminate radiation variables. If the measured output power exceeds the designated limits, the module cannot receive certification under FCC rules.
The laboratory records this value across multiple channels to capture performance variations across the entire operating band.
Production Variation
Manufacturing anomalies in the RF frontend or components like power amplifiers can shift the actual transmitted energy. Standard calibration routines during board assembly compensate for these component tolerances by flashing correction tables into the non-volatile memory of the device. Without these tables, unit-to-unit consistency degrades, risking failure during final device testing.
Operational Outcome
Handheld devices must operate within these boundary limits to prevent excessive battery drain or premature component aging. Proper alignment with the specified power margins ensures that the product maintains thermal limits during sustained data transfers.