Meaning
Receiver performance measurements identify the lowest signal power level an interface can detect when connected directly via a cable. This conductive sensitivity value eliminates the variables of antenna gain and path loss to focus strictly on the internal noise floor and demodulation efficiency. The metric is expressed in decibels referenced to one milliwatt.
It marks the boundary where the bit error rate exceeds the maximum allowable threshold for a stable connection.
Signal Injection
Testing requires a signal generator connected to the antenna port of the device through a shielded coaxial cable. Measuring conductive sensitivity in this controlled environment prevents external interference from corrupting the result. Attenuators are used to step the power down until the receiver can no longer maintain the link.
Internal Noise
Thermal noise generated within the first stage of the radio architecture limits the detection floor. Improvements in conductive sensitivity often require better low noise amplifiers or more efficient digital signal processing. A design that isolates the radio from digital switching noise achieves a better sensitivity rating.
This performance directly influences the maximum range of the final product in a deployment.
Calibration Routine
Systematic losses in the test cables and connectors must be removed from the final calculation. A reference power meter verifies the actual level arriving at the device under test to ensure the conductive sensitivity data is accurate. If the cable loss is two decibels, the generator setting must be adjusted to account for this drop.
Regular verification of the test setup prevents false failures during the certification process.