Meaning
Microscopic variation on the surface of printed circuit board trace foil affects the transmission of high frequency signals through the conductor. This microscopic variation, known as the copper roughness profile, becomes a primary factor in insertion loss as operating frequencies exceed several gigahertz. At these high frequencies, the skin effect restricts signal current to the outer boundary of the trace, increasing the effective resistance when the foil has a jagged surface.
This boundary is defined by the manufacturing treatment applied to ensure the foil adheres to the dielectric resin.
Surface Topography
Foil manufacturing processes create distinct microstructures to ensure mechanical bonding. While untreated foil is too smooth to remain attached to the resin, excessive treatment creates large peaks and valleys. The copper roughness profile is quantified using parameters such as the root mean square height or ten point mean roughness.
Designers select low profile or very low profile foils to minimize these variations.
Signal Degradation
Skin depth decreases as operational frequencies rise. At ten gigahertz, the skin depth of copper is less than one micrometer, which means the signal travels almost entirely within the copper roughness profile itself. The resulting longer propagation path increases both resistive loss and phase variation.
High speed transceivers experience greater signal distortion and attenuation under these conditions.
Measurement Validation
Verification of the trace characteristics relies on cross sectional analysis and scanning electron microscopy. These techniques measure the peak to valley heights directly on the finished board rather than relying on foil data sheets. The measurement validation of the copper roughness profile establishes the actual loss performance before final board assembly.
These values are used to update electromagnetic field solvers for more accurate channel simulation.