Meaning
Tapered surfaces applied to the vertical faces of a casting pattern facilitate its clean removal from the sand mould without disturbing the cavity walls. Draft angle taper ensures that the pattern can be drawn upward without friction damaging the sand impression. Without this slope, the sliding action of the pattern can tear the sand, leading to surface defects.
Tool Extraction
Friction between the vertical faces of the pattern and the packed sand increases the force required for extraction. As the pattern starts to move, any straight surface creates a vacuum that can destabilize the sand walls. A progressive taper breaks this contact immediately upon the first millimetre of lift.
Geometry Design
Component designers must balance the draft requirement against the functional requirements of the finished part. A typical value ranges from one to three degrees, though deeper cavities demand more generous angles. In areas where the cast face must remain perpendicular, the drawing must specify whether the draft should be added or subtracted from the nominal wall thickness.
For components that undergo automated machining, the placement of the draft dictates the chucking locations and the orientation of the raw casting in the fixture.
Tooling Inspection
Quality managers verify this taper on the wood or metal pattern using manual digital inclinometers or coordinate scanner arrays. Tooling that lacks the necessary angle is returned to the pattern shop for correction before casting production begins. Correct tapers reduce the frequency of mould repair and improve the surface finish of the cast product.