Meaning
Radio frequency measurement equipment setups combine two clean continuous-wave carrier signals to evaluate non-linear distortion in active and passive devices. Deploying a dual-tone test bench allows engineers to isolate third-order intermodulation products and measure intermodulation distortion performance under controlled power levels. Signal sources must maintain exceptional spectral purity and isolation to prevent source-generated intermodulation from corrupting device under test measurements.
High isolation combiners, directional couplers, attenuators and calibrated spectrum analyzers form the hardware core of this measurement apparatus. System qualification tests define the baseline noise floor and source intermodulation limits before testing operational modules. Measurement validity stops when input power levels overdrive test bench couplers.
Signal Isolation
Reflections between dual signal generators generate internal mixing products inside the sources themselves. Isolating sources within a dual-tone test bench requires high-directivity directional couplers or ferrite isolators. Poor isolation creates false intermodulation readings prior to reaching the device under test.
Attenuator pads inserted before the power combiner increase port isolation at the cost of available drive power.
Dynamic Range
Spectrum analyzer resolution bandwidth settings and internal phase noise dictate the lowest measurable intermodulation tone power. A high-performance dual-tone test bench provides over one hundred decibels of spur-free dynamic range. Noise floor reduction algorithms enhance small signal intermodulation detection.
Execution Sequence
Standard operating procedures require calibrating cable losses and coupler coupling factors across the test band. Generating two equal-amplitude tones on a dual-tone test bench requires balancing generator output powers at the device input plane.