Meaning
Surface zone of altered metal formed by the rapid heating and quenching of material during the electrical discharge machining process. Molten metal that is not flushed away by dielectric fluid solidifies on the workpiece to form the edm recast layer. This zone typically possesses a different microstructure than the bulk material.
Its presence can affect the final dimensions and performance of high-precision components. Careful analysis of the surface reveals the extent of the thermal damage.
Microstructure Alteration
High temperatures during the spark discharge create an edm recast layer that is often harder and more brittle than the base alloy. Microscopic cracks frequently exist within this edm recast layer due to thermal stresses. These flaws can lead to premature fatigue failure if the part is subjected to cyclic loading.
Dimensional Control
Thickness of the edm recast layer varies based on the discharge energy used during the machining cycle. Roughing cuts produce a thick edm recast layer, while finishing passes aim to minimize it. Precise control of the spark parameters is necessary to meet the tight tolerances required for RF enclosures and heat sinks.
Secondary Processing
Mechanical polishing or chemical etching removes the edm recast layer after the primary machining is complete. Removing the edm recast layer restores the fatigue resistance of the part and ensures a clean surface for plating or coating. Final inspection often involves cross-sectional analysis to verify the complete removal of this thermally affected zone.