Meaning
Extended sleep durations are measured against standard cellular paging frames to balance power conservation with downlink network responsiveness. Operating within LTE-M and NB-IoT network standards, the eDRX paging cycle defines the total duration between paging monitoring windows for sleeping devices. The parameter allows embedded cellular modems to keep radio circuits powered down across multiple hyperframe cycles while maintaining network registration.
It governs modem sleep duration and paging time window length. The parameter applies strictly to idle mode operation and terminates when active packet data transmission begins.
Timer Configuration
Negotiating sleep parameters occurs during Non-Access Stratum signaling exchanges between the terminal and core network. Embedded modems request a specific eDRX paging cycle value in attach or tracking area update messages sent to the mobility management entity. The core network evaluates this request against local operator policy and returns the assigned cycle duration in the response frame.
Module firmware stores this value and calculates precise sleep intervals for internal real-time clocks. Base stations buffer incoming downlink packets until the device reaches its next scheduled paging window.
Verification Test
Power profiling tools measure supply current to confirm sleep state transitions during hardware qualification. Engineers validate the assigned eDRX paging cycle using a base station emulator connected to a power analyzer. The test setup records baseline sleep current and wake-up peak currents over multiple hyperframes.
Test logs verify that the module returns to low-power sleep without dropping network synchronization.
Latency Limit
Real-time command execution becomes impossible when sleep intervals stretch to tens of minutes. The eDRX paging cycle delays server-initiated communication until the next active paging window opens.