Meaning
Surface finishing processes designed for high-density printed circuit boards provide a solderable and wire-bondable protective coating. The multi-layer ENEPIG deposition consists of electroless nickel, electroless palladium, and immersion gold. This structure prevents copper oxidation while ensuring reliable electrical connections.
Layer Sequence
Electroless nickel forms a diffusion barrier over the copper trace to prevent copper-tin intermetallic growth. Next, a palladium layer is deposited to prevent the nickel from corroding during the gold plating step. Finally, a thin layer of gold provides a highly conductive surface that is resistant to oxidation during storage.
This sequence yields an exceptionally flat surface finish suitable for fine-pitch surface mount devices.
Bonding Performance
Solder joint strength is significantly enhanced by the presence of the palladium layer. During reflow, the palladium dissolves into the solder, leaving a clean nickel surface for the solder alloy to wet. This mechanism results in a strong mechanical joint that resists drop-shock failure.
Process Control
Control of bath chemistry and plating time is essential to maintain the correct thickness of each metal layer. Inadequate ENEPIG deposition can lead to brittle joints or poor solderability, which compromises the integrity of high-frequency assemblies. This step is monitored using X-ray fluorescence measurement.