Meaning
Frictional force per unit area occurs along the boundaries of a mold gate during the high-velocity flow of molten polymer. This parameter, defined as gate wall shear stress, dictates the level of mechanical shear experienced by the material. Excessive stress results in molecular degradation or aesthetic surface defects near the gate entry point.
Frictional Heating
High velocity flow accelerates the generation of localized heat due to molecular friction. By tracking the gate wall shear stress, mold designers identify areas prone to thermal spikes. These spikes degrade the polymer chains, reducing the mechanical strength of the molded enclosure.
Structural Integrity
Severe mechanical shear reduces the tensile properties of high-performance plastics. When gate wall shear stress exceeds the threshold recommended by the raw material supplier, the molded part may suffer from premature cracking under external load. This degradation alters the physical behavior of the plastic.
Consequently, the housing of the assembled device might fail drop tests or environmental cycle tests even if the design geometry appears correct.
Tooling Optimization
Adjusting the cross-sectional area of the gate channel directly modifies flow velocities. In practice, minimizing gate wall shear stress involves widening the gate or slowing down the injection rate. Such adjustments must be balanced against cycle time constraints.