Meaning
Variation between the actual measured characteristic impedance of a circuit board trace and its designed nominal value arises from manufacturing tolerances and material variations. This variation, known as impedance divergence, leads to signal reflections and degradation in high speed digital circuits. The boundary of this metric is established by the specified manufacturing tolerance, beyond which the electrical performance of the channel is compromised.
It remains a critical factor in the certification of backplanes and high density interconnects.
Signal Integrity
Reflections occur at any point along a transmission line where the characteristic impedance changes abruptly. When impedance divergence occurs, a portion of the transmitted signal travels back toward the source, causing constructive or destructive interference. This interference reduces the signal margin at the receiver and increases the bit error rate.
High speed digital transceivers require tight control over this variation to ensure reliable data transfer.
Process Variation
Chemical etching processes in PCB fabrication alter the copper trace cross section from its intended rectangular shape. This alteration is a primary contributor to impedance divergence on the finished board. Variations in the thickness of the dielectric prepreg or the distribution of glass fibers also cause the impedance to drift.
Plating thickness variations across the panel further compound the issue by creating non-uniform conductor cross sections.
Remedial Strategy
Fabricators minimize these variations by adjusting trace dimensions based on test coupon measurements. These adjustments compensate for chemical and plating variations.