Meaning
Fixed binary values identify the manufacturer, part number, silicon revision and version of an integrated circuit through the Joint Test Action Group interface. The jtag idcode is a 32 bit string accessible via the test access port during board level testing. It allows automated systems to verify that the correct component is mounted on the printed circuit board.
Register Definition
The bit field is divided into four distinct segments including the version number, the part identifier, the designer identity and the check bit. Within the jtag idcode, the eleven lowest bits are reserved for the manufacturer code assigned by the jedec association. This structure follows the ieee 1149.1 standard.
Device Discovery
Boundary scan software queries the hardware to build a map of the connected devices. If the jtag idcode does not match the expected value in the configuration file, the test sequence halts to prevent damage. This provides a safety check for the assembly process.
Chain Verification
Multiple chips often share a single test bus in a daisy chain arrangement. Each jtag idcode must be shifted out in the correct order to confirm the integrity of the data path. This identifies open circuits or shorted pins.