Meaning
Diagnostic procedures evaluate the reliability of single-wire sub-bus networks under electrical and timing anomalies. Performing lin bus stress helps design teams ensure that auxiliary control units, such as door modules or window lifts, remain responsive during system disturbances. The test exposes weaknesses in the software driver synchronization routines.
Master Synchronization
Receiver nodes rely on a dedicated synchronization byte to adjust their internal baud rate generator. During lin bus stress, the tester applies clock skew to the master node’s sync field to measure the slave’s tracking range. If the slave node fails to adjust its sample clock, it will misinterpret subsequent data bytes.
This evaluation defines the maximum allowable clock tolerance for the slave transceiver.
Frame Distortion
Signal voltages are manipulated to simulate loose connections or high ground offsets between nodes. When subjected to lin bus stress, the bus line is loaded with extra capacitance to slow down the rising edges of the signal. This distortion reduces the timing window for valid data sampling, testing the transceiver tolerance.
Error Recovery
Faulty frames must be handled gracefully by the local nodes without causing network paralysis. The lin bus stress process forces erroneous checksums and framing errors to verify that the node under test returns to a listening state. Successful recovery prevents the module from locking up or transmitting invalid states.