Meaning
Capturing internal signal states in real time without halting the execution of the central processing unit enables deep debugging of complex embedded applications. System designers use a logic trace macrocell to monitor the instruction flow and data transactions across the internal system bus. This dedicated hardware block filters and formats trace data before sending it to an external debug probe.
Debuggers rely on this structural element to capture intermittent bugs that are impossible to isolate using traditional software breakpoints.
Hardware Architecture
A specialized on-chip module sits alongside the processor core, monitoring the address, data, and control lines. The logic trace macrocell operates independently of the main program execution, requiring no processor cycles or interrupt overhead. It uses a high-speed interface to stream the compressed trace packets to dedicated pins.
This physical independence ensures that timing-critical processes are not disrupted during the monitoring session.
Debug Mechanism
Trigger registers are configured by the developer to start and stop the trace session based on specific hardware events. For example, a memory write to a protected address or the execution of a specific instruction branch initiates the storage of the surrounding cycle data. Internal hardware decoders compress the captured address ranges to maximize the utilization of the available trace bandwidth.
The compressed data is then routed to either a local trace memory or an external interface block.
Signal Capture
Analysis software on the host computer reconstructs the original program execution flow from these packets. This reconstruction shows the exact sequence of events leading up to a system crash.