Meaning
Time-dependent permanent strain progression under constant stress exhibits a non-proportional strain rate increase once stress levels cross a critical material threshold. Mechanical behavior characterized as non-linear creep occurs rapidly in polymers and structural sealants at elevated homologous temperatures. The process accelerates strain accumulation under high stress compared to linear viscoelastic predictions, leading to rapid force relaxation in bolted joints and module seals.
Strain rates follow power-law or exponential stress dependencies rather than simple linear ratios. Analysis stops applying once macroscopic fracture or tertiary necking initiates within the material structure.
Stress Dependence
Elevated stress levels trigger power-law strain response, multiplying deformation rates significantly. Small stress increments yield disproportionately large creep strain over extended time intervals.
Material Degradation
Polymeric gaskets operating at high temperatures suffer steady compression set through accelerated chain scission. Creep deformation lowers residual sealing pressure, initiating leak paths across enclosure interfaces. Micro-void formation inside metallic fasteners weakens load-bearing cross sections under sustained high-temperature tension.
Structural relaxation reduces clamp load, requiring lower initial design stress limits to avoid early failure.
Structural Boundary
Creep equations lose validity when stress relaxation lowers stress below the non-linear threshold. Finite element models must switch to linear viscoelastic formulations under reduced stress regimes. Fastener pre-load calculations incorporate stress-relaxation curves to forecast long-term clamping retention.