Meaning
Lithographic adjustment processes modify the geometric shapes on semiconductor photomasks to compensate for the distortion caused by light diffraction during wafer exposure. As feature sizes on silicon shrank below the wavelength of the exposure light, optical proximity correction became necessary to prevent structural issues such as line-end shortening, corner rounding, and line-width variations. The technique adds small, non-resolving features like serifs and scattering bars to the layout on the mask.
These changes ensure that the light pattern reaching the wafer resist matches the intended rectangular circuit designs, preventing electrical open or short circuits in the finished silicon chips.
Geometric Adjustment
Diffraction limits cause sharp right angles on a photomask to appear as rounded shapes on the printed wafer surface. To prevent this, the mask pattern is modified by adding outer serifs or subtracting inner serifs at the corners. Additionally, isolated narrow lines receive parallel scattering bars that do not print themselves but help focus the light for the primary feature.
These modifications ensure that critical dimensions remain within design tolerances.
Software Implementation
Electronic design automation software automatically applies these modifications after the layout is finalized. The software uses mathematical models of the optical system to simulate how the light will behave. It then iteratively adjusts the mask geometry until the simulated wafer image matches the target layout.
This heavy computational step is performed on massive server clusters before mask fabrication begins.
Manufacturing Benefit
Implementing these corrections improves the process window and yield of advanced integrated circuits. It reduces the sensitivity of the lithography process to minor variations in focus. Uniform gate lengths minimize device performance variation.