Meaning
Desorption process by which volatile chemical compounds or entrapped moisture evaporate from solid materials into surrounding vacuum or controlled atmosphere environments. Uncontrolled outgassing causes volatile organic compounds to deposit onto sensitive optical windows and RF connectors, degrading signal performance. Material selection for sealed device enclosures depends on testing under thermal vacuum conditions to quantify volatile mass loss.
Standards mandate screening for total mass loss and collected volatile condensable material before approval for space flight or sealed optoelectronic integration. The process decreases in rate over time as volatile species deplete within the bulk matrix.
Material Release
Polymer matrices, adhesives, elastomeric gaskets, and printed circuit board substrates release entrapped solvents when exposed to reduced pressure or elevated temperature. Accelerating outgassing through high-temperature bake-out procedures depletes volatile constituents prior to final product assembly. Material formulations with high degree of polymerization demonstrate lower volatile release rates.
Condensation Risk
Volatilization of internal compounds creates airborne molecules that migrate toward cooler surfaces within sealed device housings. Evaporated species resulting from outgassing condense on optical lens surfaces, reducing light transmission efficiency in camera modules. Enclosure designs must avoid internal organic materials that release volatile fractions above specified threshold levels.
Vacuum Standard
Screening procedures standardized in ASTM E595 evaluate candidate materials by measuring weight loss at elevated temperature under vacuum. Acceptable material thresholds limit outgassing to a maximum total mass loss of one percent and collected volatile condensable material of zero point one percent. Passing these testing metrics validates material compatibility for hermetically sealed electronic hardware.