Meaning
Chemical vapor processing using ionized gas discharges enables the growth of thin films on substrates at relatively low temperatures. This technique, pecvd deposition, utilizes radio frequency energy to generate a plasma that dissociates precursor gases into reactive radicals. It allows the formation of silicon nitride or silicon dioxide layers on thermally sensitive substrates.
The resulting coatings protect active circuits without damaging low-melting-point metals.
Plasma Dynamics
Radio frequency power levels determine the density of the reactive species and the energy of ion bombardment on the wafer surface. Higher power increases the deposition rate but can introduce compressive stress. This stress must be balanced.
Film Quality
Stoichiometry and density of the deposited layer are highly dependent on the precursor gas ratio and chamber pressure. In a typical process, silane and ammonia are mixed to create a protective passivation layer over the metallization lines. If the hydrogen content in the film is too high, it can lead to long-term drift in the threshold voltage of nearby transistors.
This drift is avoided by optimizing the deposition temperature and gas flows.
Step Coverage
Conformal coatings must cover the steep vertical sidewalls of trench structures to ensure complete isolation. The directional ion flux from the plasma improves the uniformity of the film over these difficult geometries. This prevents thin spots that could break down electrically.