Meaning
Frequency-dependent directional shifts in phased array antennas can alter the targeting direction of the main radar lobe. Radar beam squint represents the angular displacement of the beam peak from the physical broadside of the antenna array. This phenomenon often occurs when using non-true-time-delay phase shifters across a wide bandwidth.
Angular Deviation
Signal frequency changes alter the electrical spacing between array elements, causing the beam to steer away from the target angle. This variation creates radar beam squint that shifts the beam axis away from the boresight direction. This effect must be compensated during frequency-modulated sweeps.
System Impact
Range measurement accuracy degrades if the antenna beam points in a different direction at the start and end of a sweep. Uncompensated radar beam squint reduces the effective gain toward the target, which lowers the signal-to-noise ratio. This degradation diminishes the maximum detection range.
Compensation Method
Digital beamforming processors dynamically adjust the phase weights of each channel to counteract frequency sweeps. This action stabilizes the radar beam squint across the entire signal bandwidth, ensuring the beam remains focused on the target area. This processor intervention sustains sensor reliability, allowing the system to maintain high accuracy even during ultra-wideband chirps.