Meaning
Controlled heating sequences during component replacement prevent thermal damage to both the board substrate and adjacent devices. A custom rework thermal profile plots the target temperatures of the assembly against time to guide the localized heating process.
Heating Phase
Standard profiles consist of preheat, soak, reflow, and cooling stages to manage thermal expansion. The preheating phase slowly raises the entire board’s temperature to reduce thermal shock. During the soak phase, temperatures stabilize to activate the flux and ensure uniform heat distribution.
The profile then peaks during the reflow stage to melt the solder joints before a controlled cooling phase solidifies them.
Process Control
Rework systems utilize thermocouple feedback to monitor temperature in real time. Sensors attached near the target component provide data to the heater control loop, adjusting the power output dynamically. This feedback prevents localized hot spots that can damage internal chip structures or warp the board substrate.
Regular calibration of these sensors is required to maintain the accuracy of the heating cycle.
Assembly Protection
Failing to match the recommended heating curve can lead to delamination and component cracking. If the temperature rises too quickly, moisture trapped inside plastic packages can vaporize and cause internal fracturing. Conversely, excessive time at peak temperature degrades the copper-tin alloy boundary, creating brittle joints.
Technicians must load the correct program for each board assembly to avoid these defects.