Meaning
Mapping raw internal receiver voltage measurements to known absolute radio frequency power levels establishes consistent signal strength reporting across manufactured wireless devices. Automated test systems execute RSSI calibration during factory production of cellular and Wi-Fi modules to compensate for component tolerances and trace attenuation. The procedure injects precise RF power levels into the antenna port and records corresponding internal gain readings across operational frequency bands.
This process calibrates internal power reporting metrics and does not adjust physical transmitter output levels or antenna radiation patterns.
Measurement Compensation
Analog receiver front-ends exhibit gain variations caused by semiconductor lot differences and passive component tolerances. Temperature variations during operation further shift raw receiver power estimations away from actual input signal power.
Factory Alignment
Vector signal generators feed calibrated power levels into the module antenna socket inside shielded test enclosures. Calibration software measures internal analog-to-digital converter counts at minimum and maximum channel frequencies. Offset and slope correction values are calculated and saved directly into non-volatile memory on the device.
Testing across multiple power steps linearizes receiver reporting over the full operational dynamic range.
Telemetry Accuracy
Downstream location algorithms rely on standardized signal strength reporting to estimate distances between connected nodes. Calibration signoff ensures that production units report identical power values when exposed to equal input signals. Device quality reports confirm calibration table integrity prior to final product assembly.