Meaning
Alterations made to standard production hardware for the purpose of facilitating laboratory measurements allow test engineers to access internal signal paths or force specific operating states. This test sample modification often includes the addition of rf connectors or the installation of specialized firmware that bypasses normal user controls. These changes are necessary because standard consumer devices do not typically provide the interface required for precise conducted testing.
The accuracy of the final certification depends on these modifications being performed correctly and documented thoroughly.
Hardware Preparation
Skilled technicians may remove an internal antenna and solder a miniature coaxial cable to the output pad of the radio chip. This setup enables the direct connection to measuring instruments like signal analyzers.
Software Management
Modified firmware allows the device to transmit continuously on a single channel or sweep through a range of frequencies. These modes are essential for verifying compliance with emission limits and bandwidth requirements.
Sample Integrity
Regulatory bodies require documentation of all changes made to ensure that the tested unit still represents the performance of the final product. After testing is complete, these modified units are usually destroyed or marked for laboratory use only to prevent them from entering the commercial supply chain.