Meaning
Reliability evaluation method exposing a device to alternating high and low temperature extremes induces mechanical fatigue in electronic assemblies. Performing a thermal cycling stress test reveals weaknesses in solder joints, housing seals, and adhesive bonds due to different rates of thermal expansion. This testing ensures that integrated systems can survive harsh environmental shifts during transit and operation.
Thermal Stress
Different coefficients of thermal expansion cause materials to expand and contract at different rates. During a thermal cycling stress test, the shear stresses build up at the interface between the silicon chip, the solder balls, and the circuit board. These repeated forces cause microscopic cracks to form in the conductive connections.
Wear Failure
Intermittent connections and complete open circuits represent the typical outcomes of this fatigue. As the thermal cycling stress test progresses, the cracks in the solder joints widen, which increases the path resistance and can cause device failure. This physical degradation is especially common in lead-free solder alloys subjected to wide temperature swings.
Cycle Optimization
Dwell times at each temperature extreme must be long enough to allow the device to reach thermal equilibrium. This optimization ensures the thermal cycling stress test exerts maximum fatigue on the assembly.