Meaning
Non-destructive imaging technique that creates volumetric views of an object enables the internal examination of complex electronic assemblies. Industrial scanners use three-dimensional x-ray inspection to identify hidden defects like voiding in solder joints or broken internal wires.
Imaging Reconstruction
Multiple two dimensional slices are captured as the source and detector rotate around the sample. Algorithms then combine these images to form a complete 3D model of the internal structure. This capability enables an inspector to view any layer of a printed circuit board without cutting the module open.
Defect Detection
Quantitative analysis of the reconstructed volume reveals the size and location of air bubbles within a ball grid array. Because the software can measure the volume of these voids, it can automatically reject parts that fall outside of the safety margin. This level of detail is impossible to achieve with a standard flat x-ray.
Process Control
High reliability sectors like aerospace and medical devices require this verification for every essential assembly. The data collected during the scan provides a permanent record of the internal state of the device at the time of manufacture. Using this information, engineers can adjust the reflow oven temperature or the solder paste volume to eliminate recurring issues.
The speed of modern computing allows these scans to occur at a rate that matches the output of high speed assembly lines. Automated inspection software reduces the chance of human error during the final quality check.