Meaning
Vertical electrical connection paths pass completely through a silicon wafer or die to enable direct three-dimensional routing. A through silicon via provides the shortest possible interconnect length between stacked integrated circuits, which minimizes signal delay. This structure replaces traditional wire-bonding methods in high-density chip stacks.
Fabrication Sequence
Etching and metal deposition processes create the conductive columns within the silicon substrate. The construction of a through silicon via involves drilling the deep holes using reactive ion etching and then lining them with insulating and barrier layers. Finally, copper is electroplated into the holes to complete the conductive pathway.
This plating requires precise chemistry to ensure that the metal fills the narrow opening completely and does not leave internal voids.
Thermal Strain
Mismatched expansion coefficients between copper and silicon can create mechanical stress during thermal cycles. Since copper expands more than silicon, the columns of a through silicon via exert pressure on the surrounding active circuitry when heated. Keep-out zones are established to prevent electrical characteristics from shifting.
Wafer Thinning
Grinding the back of the substrate is necessary to expose the embedded conductive columns. To reveal the through silicon via from the rear side, the wafer is mounted on a carrier and thinned. This thinning process must be carefully monitored to avoid damaging the microstructures.