Meaning
Semiconductor interface modifications alter the electronic characteristics of metal insulator semiconductor structures. A critical transition in these systems is trap passivation inversion, which occurs when the chemical neutralization of interface states is sufficient to change the dominant conduction mechanism from trap assisted transport to band to band transport. This change reduces the density of active carrier traps at the interface.
Without this transition, the presence of many active states would pin the Fermi level, preventing the formation of a low resistance inversion layer under the gate. In modern high mobility transistors, achieving this transition is necessary to obtain high transconductance and low subthreshold swing.
Chemical Treatment
Exposing the semiconductor surface to atomic hydrogen or nitrogen compounds satisfies the unsaturated surface bonds. In this process, trap passivation inversion is triggered when the concentration of hydrogen atoms at the interface surpasses the density of dangling bonds. This surface treatment reduces the density of interface states by multiple orders of magnitude.
Measurement Strategy
Capacitance voltage measurements characterize the density and energy distribution of interface traps across the bandgap. To verify trap passivation inversion, engineers measure the capacitance of the gate stack at multiple test frequencies. A lack of frequency dispersion indicates that the interface traps have been effectively passivated, enabling high gate control.
Performance Improvement
Reducing the density of active states improves both carrier mobility and device reliability under electrical stress. After achieving trap passivation inversion, the transport carrier mobility increases because of the reduction in remote charge scattering. This improvement translates to higher switching speeds and lower power consumption in the final circuit.