Meaning
The variable junction capacitance of a semiconductor diode varies as a function of the reverse-bias voltage applied to its terminals. Electronic oscillators and filters utilize varactor capacitance to achieve dynamic frequency tuning by altering the depletion region width of the diode under analog control. The tuning allows the circuit to adjust its resonant frequency without using moving parts or manual adjustment.
Voltage Dependence
Voltage variations across the diode terminals change the width of the depletion region, which acts as the dielectric of a capacitor. Increasing the reverse-bias voltage pulls mobile charge carriers away from the junction, widening the depletion region and reducing the capacitance. Conversely, a lower reverse-bias voltage allows the depletion region to narrow, which increases the capacitance.
The voltage-to-capacitance curve is determined by the doping profile of the silicon or gallium arsenide semiconductor junction.
Tuning Range
Tuning range limitations are determined by the ratio of maximum to minimum capacitance across the operating voltage range. High-ratio varactors allow for a wider frequency sweep, but they often exhibit a higher series resistance, which reduces the quality factor of the resonator. Designers must choose the doping profile and the operating voltage range to balance the tuning range against the phase noise requirements of the system.
Frequency Modulation
Signal modulation relies on the fast response time of the diode junction to convert analog control voltages into frequency changes. High-frequency synthesis relies on this fast response to perform direct frequency modulation in analog transmitters. The control voltage must be filtered to prevent noise from modulating the capacitance and causing unwanted phase noise on the output signal.